Lean practitioner module 3: Embedding Lean

Duration

4 hours

Purpose/scope

The purpose of this standard is to provide the learner with the knowledge and skills to build the Lean Practitioners confidence in their ability to lead an active project through to the final stages with additional support throughout the process.

The workshop focuses in more detail on the later sections of the A3 publication and enables participants to draft initial content for their projects.

Delivery

The following delivery methods may be used in the delivery of this standard:

• face to face learning environment only (such as classroom/workshop etc.)
• virtual only (guided learning on-line)

This standard is predominantly theoretical training

This standard is considered to be set at an intermediate level

Assessment Type

Informally Assessed

Recognised Organisation

The Lean Construction Institute UK

Contact – Lucy Macleod: admin@leanconstruction.org.uk

Lean Practitioner Module 3: | Lean Construction Institute

Quality assurance

Recognised

CITB will gain assurance through the Recognised Organisation’s quality arrangements.

Approved Training Organisation’s will be required to supply confirmation of approval (centre approval and scheme approval) with the related Recognised Organisation’s awarding organisation or body. In most cases this will be an approval certificate provided by the Recognised Organisation’s awarding organisation or body, listing the routes, qualifications, and categories they are approved to deliver. In addition, a copy of the most recent external quality assurance monitoring report will be required, relating to the standard that you wish to be approved for.

This information will be reviewed by CITB’s quality assurance team. Approval will be subject to the required Recognised Organisation’s documentation being supplied by you. As part of the quality assurance checks, CITB may confirm the accuracy of documentation with the issuing organisation.

Please refer to the Requirements for Approved Training Organisations Appendix 6 for further guidance on quality assurance.

Standard Classification

Lifetime (Please note standards using this classification will only be grant aided once per learner)

Review cycle

On request or 60 months (5 years) from approval date.

Additional information about this standard

Need to have completed Lean Practitioner Workshop 1, Customers, values and waste and Lean Practitioner Workshop 2, Leading Improvement

To be practically applying their knowledge on a Lean Practitioner Improvements Project