Built up roofing (RBM) waterproof membrane roofing systems penetrations

CITB has developed this standard in discussion with industry

Duration

Minimum 2 day of 6 learning hours

Purpose / scope

The purpose of this standard is to provide the candidate with the knowledge and skills to install waterproof membrane to roof penetrations.

The scope of this standard covers:

• how to carry out the detailing of penetrations found on a flat roof
• understanding different penetrations
• repairing penetrations
• installing around penetrations

Occupational relevance

Training delivered against this standard is relevant to the following occupational group(s):

• operative and craft
• supervision.

Candidate prerequisites

There are no candidate pre-requisites as part of this standard. However, a basic knowledge of built up roofing terminology and techniques would be beneficial.

Before candidates perform the work on a construction site, candidates must have successfully completed roofing-specific training for working at heights

Instruction / supervision

As a minimum, course instructors must be able to demonstrate that, in relation to this standard, they have:

• A train the trainer or instructional techniques course certificate
• Successfully completed training to this standard 
• At least 10 years relevant industrial experience
• A verifiable CV.

Delivery

The following methods may be used in the delivery of this standard:

• classroom and / or workshop

All materials and equipment must be of a suitable quality and quantity for candidates to achieve learning outcomes and must comply with relevant legislation.

The class size and candidate/instructor ratio must allow training to be delivered in a safe manner and enable candidates to achieve the learning outcomes.

This standard is considered to contain 51 per cent or more practical learning.

This standard is considered to be set at an intermediate level.

Assessment

For the successful completion of training, candidates must complete an end of course practical assessment or knowledge test that measures the learning outcomes and has a pass or fail criteria.

Quality assurance

Assured

Quality assurance against this standard will require initial approval of the training organisation and their content mapped to the standard. 

CITB will also conduct an approval intervention, either desk-based or centre visit, to ensure the training organisation can meet the requirements of the training standard. 

Approved training organisations (ATOs) will be required to present information on records of training and assessment upon request to CITB for desk based analysis. They will also be visited annually by the CITB quality assurance team.

Renewal

There are no mandatory renewal or recommended refresher requirements for this standard.

Classification

Lifetime (Please note standards using this classification will only be grant aided once per delegate)

Approval date

TBC

Review cycle

On request

Learning outcomes

Additional information about this standard

Health and Safety Executive (HSE)

• HSE Health and safety in roof work
• HSE Fire safety in construction
• HSE Working on roofs
• HSE Fragile roofs, safe working practices
• Health & Safety at Work etc Act 1974
• Health and safety in construction
• Working at height
• PPE Regulations
• PPE
• CDM
• Manual handling
• Noise
• Hand-arm vibration

British standards

View all available British Standards at the BSI website

BS 8217:2005 - Reinforced bitumen membranes for roofing. Code of practice

BS 6229:2018 - Flat roofs with continuously supported flexible waterproof coverings. Code of practice

NFRC Safe2Torch guidelines 2017