- Published
- Painting and decorating
- Assured
- £140 (Tier 2)
- GET3326
The purpose of this course is to prepare the delegates for real world mural application. The advanced applying printed murals course covers more than just applying a mural on a flat wall. Complex surfaces, resolving problems with designs and handling obstacles are all covered in this advanced course.
- Published
- Roofing (single ply)
- Assured
- £60 (Tier 1)
- GET1778
The purpose of this standard is to provide the candidate with the knowledge for detailing of single ply roofing, where the roof changes geometry or shape, and where the roof meets another part of the building.
- Published
- Waterproofing
- Assured
- £140 (Tier 2)
- GET3092
The purpose of this standard is to provide the delegate with the knowledge to support the safe and correct application of liquid, multi-pack, resin and mastic asphalt Type A waterproofing systems.
- Published
- Painting and decorating
- Assured
- £140 (Tier 2)
- GET3474
The purpose of this standard is to provide the learner with the knowledge and skills to support the following scope:
demonstration of work skills to prepare, load, protect, communicate, measure, assemble, position, secure and clean.
use and maintain hand and power tools, airless spray equipment and associated equipment. set up and adjust spray equipment to achieve the finish stated in the given working instructions, relating to the following: preparation of coatings, loading the system, monitor and maintain supply, apply water-borne or solvent-borne coatings by airless spray.
- Published
- Painting and decorating
- Assured
- £70 (Tier 2 - refresher)
- GET3475
The purpose of this standard is to provide the learner with the knowledge and skills to support the following scope:
demonstration of work skills to prepare, load, protect, communicate, measure, assemble, position, secure and clean,
use and maintain hand and power tools, airless spray equipment and associated equipment, set up and adjust spray equipment to achieve the finish stated in the given working instructions, relating to the following: preparation of coatings, loading the system, monitor and maintain supply, apply water-borne or solvent-borne coatings by airless spray.
- Published
- Insulation and building treatments
- Assured
- £60 (Tier 1)
- GET3015
The purpose of this standard is to provide the delegate with the knowledge to further support their learning with the following: carrying out pre and post installation checks; types of surface finishes; hazards with resources; protecting work and work area from damage; minimising thermal bridging; installing vapour control barriers; recognising specific requirements for structures of special interest, traditional construction and historical significance; recognising when specialist skills are required; how to communicate with your team and others; looking after tools and equipment; working at height and safe use of access equipment and harness systems.
- Published
- Asbestos
- Assured
- £240 (Tier 3)
- GET2183
The objective of this qualification is to provide analysts and similar specialists to have the knowledge to enable them to carry out inspection and testing of asbestos works that have been carried out to ensure they meet the correct standards required by HSG248.
- Published
- Asbestos
- Assured
- £140 (Tier 2)
- GET2181
The objective of this qualification is to provide learners with the knowledge and understanding to be able to carry out analysis of samples in the workplace.
- Published
- Bricklaying
- Assured
- £140 (Tier 2)
- GET1780
The purpose of training delivered against this standard is to provide candidates with a practical introduction to the fixing of insulation boards and how to position, bond and tape as per specification
- In development
- Interior systems
- Assured
- £60 (Tier 1)
- GET0200
This training standard is in development and will be published shortly