Corian fabricator
Overview
Duration
Minimum 2 days of 6 learning hours per day
Purpose/scope
The purpose of training delivered against this standard is to provide candidates with knowledge and hands on skills to fabricate and repair Corian solid surfaces.
Scope:
- Best practice for tool and equipment use
- Setting up the worktop for solid surface fabrication
- Templating Corian surfaces
- Cutting and jointing Corian
- Sink and hob cut outs (including incorporating a sink in a worktop)
- Framing and supporting Corian
- Adding upstands (including coves) and downturns
- Thermoforming Corian
- Backlighting Corian
- Sanding and finishing Corian
- Repairing Corian
Occupational relevance
Training delivered against this standard would be relevant to the following occupational group(s):
- operative and craft
- supervision.
Candidate pre-requisites
There are no candidate pre-requisites as part of this standard. However, a basic knowledge of wood fabrication terminology and techniques would be beneficial.
Instruction/supervision
As a minimum, course instructors must be able to demonstrate that, in relation to this standard, they have:
- a train the trainer or instructional techniques course certificate
- successfully completed training to this standard
- at least 2 years relevant industrial experience as a fitter
- a verifiable CV.
Delivery
Delivery may be in an on or off the job environment.
All materials and equipment must be of a suitable quality and quantity for candidates to achieve learning outcomes and must comply with relevant legislation.
The class size and candidate to instructor ratio must allow training to be delivered in a safe manner and enable candidates to achieve the learning outcomes.
The following delivery methods may be used in the delivery of this standard:
- classroom
- e-learning
- a blend of classroom and e-learning
- workplace
This standard is considered to contain 51 per cent or more practical learning.
This standard is considered to be set at an intermediate level.
Assessment
For the successful completion of training, the trainer must be satisfied that the candidate has achieved all of the learning outcomes.
Quality assurance
Assured
Quality assurance against this standard will require initial approval of the training organisation and their content mapped to the standard.
CITB will also conduct an approval intervention, either desk-based or centre visit, to ensure the training organisation can meet the requirements of the training standard.
Approved training organisations (ATOs) will be required to present information on records of training and assessment upon request to CITB for desk based analysis. They will also be visited annually by the CITB quality assurance team.
Renewal/refresher
There is no mandatory renewal or recommended refreshment requirements for this standard.
Approval date
December 2019
Review cycle
Either on request or in 3 years from approval date.
Learning outcomes
The candidate will be able to:
- Know the best practice for tool and equipment use
- How to set up a worktop for solid surface fabrication
- Templating Corian surfaces
- Cutting and jointing Corian
- Sink and hob cut outs (including incorporating a sink in a worktop)
- Framing and supporting Corian
- Adding upstands (including coves) and downturns
- Thermoforming Corian
- Backlighting Corian
- Sanding and finishing Corian
- Repairing Corian
Additional information about this standard
See also:
How did we do today? Give feedback